Тема: How to connect fuel level sensor to Teltonika FMB125, FMB630

Best solution - to use fuel level sensor with digital interface


•    Interface to be used:  RS485 interface
•    How many sensors can be connected : 5
•    Wiring (using the Eurosens Dominator RS  cable)



fmb125 rs wiring

Welcome to the GPS tracking news telegram channel
EN: https://t.me/telematics
RU: https://t.me/telematicsru

2

Re: How to connect fuel level sensor to Teltonika FMB125, FMB630

Setting up the sensors : set RS485 and set FLS address. Different addresses must be set when you connect several sensors.


fmb125 fuel level sensor settings

Welcome to the GPS tracking news telegram channel
EN: https://t.me/telematics
RU: https://t.me/telematicsru

3

Re: How to connect fuel level sensor to Teltonika FMB125, FMB630

Setting up the GPS tracker:
1.    Open I/O section and find LLS fuel level sensors. Set LOW priority and “Event only” option to “NO” for sensors that you will use.
fmb125 fuel level sensor settings

Welcome to the GPS tracking news telegram channel
EN: https://t.me/telematics
RU: https://t.me/telematicsru

4

Re: How to connect fuel level sensor to Teltonika FMB125, FMB630

2.    Open RS232/RS485 tab and  set addresses of connected sensors .

fmb 125 sensor address

Welcome to the GPS tracking news telegram channel
EN: https://t.me/telematics
RU: https://t.me/telematicsru

5

Re: How to connect fuel level sensor to Teltonika FMB125, FMB630

Setting up the GPS tracking platform (FMB125 and Wialon as an example)
Sensor №1  – message “io_201”, in 1…4095 range
Sensor №2  – message “io_203”, in 1…4095 range
Create sensor:
fmb125 fuel sensor wialon

Welcome to the GPS tracking news telegram channel
EN: https://t.me/telematics
RU: https://t.me/telematicsru